Tuesday, September 6, 2016

Painting Minis - Paint Hack

Paint containers, for the most part, suck. They get gummed up around the rim, fail to seal properly, and dry out. They also make it hard to get a small measure of paint out to mix.




There's a paint company that has the right idea by putting the paints in dropper bottles. However my FLGS doesn't carry them. It only carries Warhammer and P3 paints. But where there is a will...


I purchased these off of Amazon: a twelve pack of 1 oz dropper bottles. Most of the bottles come in 50 packs, but I didn't think I needed more than twelve. I was wrong on two fronts. I have more than 12 colors of paint and 1 oz is too large a bottle. Paints apparently come in .5 oz or 15ml bottles. I went back on Amazon and order a 50 pack of 15ml bottles. I am sure I will need them as time goes on.

Another thing I noticed was that the bottle openings were very tiny (before adding the dropper). I would need some kind of funnel to get my paint in there. Enter the drug-store medicine syringe (without needle).



I pulled out the plunger and filled the paint into the back of the syringe carefully. Then used the plunger to force the remaining paint through. You'll want to wash the syringe immediately after this to avoid the paint drying inside.

And... Oovah! Easily cleaned and easy to measure paint bottles!



There is some paint wasted in the transfer, but I figure the paint it will save me in mixing and not crusting the cap will make up the difference.


PS> Sorry for not keeping on the posts. My family is becoming the guardian of my 18 year old step-niece who has severe autism. She takes up a lot of our free time. Drama, drama, drama!